Verify burner/appliance operation, Adjustment and verifi cation, Annual start-up & service – Carlin 301CRD User Manual
Page 21: Annual start-up and service
Model 201CRD & 301CRD 240-VAC Advanced oil burners — Instruction manual
Carlin part number MN2301A Rev. 10/21/10
– 21 –
Verify burner/appliance operation
Check burner / appliance / controls
operation
instructions.
primary controls that enter latch-up after multiple lockouts, force latch-up
to occur as well. Reset primary control per control data sheet instructions
after each test.
sequence through normal operation. Verify correct operation of burner and
primary control throughout.
Verify vent system operation
from building. If the building contains any exhaust fans or conditions that
could affect vent performance, check burner/appliance/vent operation with
exhaust fans (or other conditions) operating.
Combustion/ventilation air
with appliance/burner wiring to prevent operation of the burner if the air
louvers are not fully opened.
Prepare burner for normal operation
tion.
Train the user
user.
taminants in the vicinity of the burner/appliance.
5. Adjustment and verifi cation
(cont.)
Annual start-up & service
This burner must be started and serviced at least annually
by a qualifi ed service technician. Failure to properly maintain
and service the burner could result in severe personal injury,
death or substantial property damage.
that may have occurred during the previous season and to verify user is
aware of proper operation and care of the burner/appliance.
procedure on page 10.)
clean them with a vacuum cleaner with brush attachment while the com-
bustion head assembly is out of the burner.
OEM guide.
on page 11 of this manual. Replace if proper spacing cannot be achieved
or if components are damaged.
Oil line fi lters — Use a non-bypassing fi lter to prevent nozzle
plugging caused by poor oil fi ltration. Non-bypassing fi lters
prevent small foreign particles from bypassing the fi lter, a
common problem with fi ber element type fi lters. Another
problem of some fi lters is the fi ber from fi lter element tears
can break away and plug the nozzle or fuel unit.
system inspection and checks.
6. Annual start-up and service