Carlin EZGasPro User Manual

Carlin Equipment

Contents

PLEASE read this first ......................................... 2
Codes and standards .......................................... 2
EZGas Pro burner at-a-glance ............................ 3
Prepare site • prepare burner • mount burner ..... 4
Install gas piping .................................................. 9
Wire burner ........................................................ 10
Check system • start-up burner/appliance ......... 11
Perform checkout procedure • fill out certificate 14
Maintenance and service procedures................ 15
Troubleshooting ................................................. 17
Dimensions and mounting information .............. 19
Replacement parts ............................................ 20

Instruction manual

Ratings

Input:

..................................50,000 to 275,000 Btuh

Fuels:

............................Natural gas or propane gas

Max. supply pressure ...............14 inches w.c.

Min. supply pressure ..................5 inches w.c.

Manifold pressure ...................3.5 inches w.c.

Electrical: Power ............................ 120V/60 Hz/1-Phase
Motor .............1/15, 1/7, or 1/6 HP, 3450 RPM
Current .............. Approx. 2.0, 2.5 or 2.3 amps
Ignition:

............ Carlin Model 41800 solid state ignitor

Control:

Carlin Model 60200FR microprocessor control

Agencies:

....UL Listed (US and Canada)

Installer/servicer — Except where specifically stated

otherwise, this manual must be used only by a qualified
service technician. (In the state of Massachusetts, this
product must be installed by a licensed Plumber or Gas
Fitter.) Failure to comply with this or other requirements in
this manual could result in severe personal injury, death
or substantial property damage.

User — Refer only to User’s Information manual for in-

formation regarding operation of this burner. The burner
Instruction Manual is intended only for your service techni-
cian. The burner and heat exchanger must be inspected
and started at least annually by your service technician.

70 Maple Street

East Longmeadow, MA 01028

Ph 413-525-7700

Fx 413-525-8306

Carlin Combustion Technology, Inc.

ech

support

800-989-2275

carlincombustion.com

LISTED

™

Pro