C.B.S. Scientific HTLE-7002 - Manual (Page 6)

C. B. S. œ Scientific 6 HTLE-7002
*1.2 Specifications
Constructions:
Electrophoresis
base Acrylic
Enclosure/lid PVC/Acrylic
Buffer Tanks Acrylic
Cooling block Aluminum/stainless steel
Air bag Nylon/Delrin
Mains input 10A/250VAC/50Hz or 20A/125V/60Hz
Fuse 5A/250V (TT), IEC 127
Power supply output 6A/250VAC
DC Power Input 20A/1000V
Power cord Continental Europe, CEE7/7
250VAC/6A, 65º C, 3 x 0.75mm 3
conductor UK & Ireland BS1363,
240VAC 50Hz, 5A, 70º C, 3x0.75mm
3
conductor U.S./PR, 16awg, 3 conductor,
60º C, SJT
Safety Certification EN61010-1-1993 (IEC1010-1)
EN 50082-1 (IEC 801-2,3,4)
EN 55022 (CISPR 22)
1.3 Overall Sizes and Shipping weight
HTLE-7002
Shipping weight 69 lbs
Overall size
(inches) (l x w x h) 24 x 19 x 8
Overall size
(cm) (l x w x h)
61 x 48 x 20
1.4 Safety
Power to the HTLE-7002 is supplied by an external DC voltage power supply that must be
ground isolated so that the DC voltage output floats with respect to ground. For any power
supply used, the maximum specified operating parameters for
the units are:
Maximum Limits
100VDC/cm of gel
20W watts power
50mA current
65
°C ambient temperature
Current to the unit, provided from the external mains connection, must enter the unit through
the safety cover assembly, providing a safety interlock to the user. Current to the power supply is
provided from the safety interlock. Both AC and DC is interrupted should the safety interlock be
activated. Current to the unit is broken when lid is lifted. Do not attempt to use the unit without
the safety lid, and always turn the power supply off before opening the lid, or when
working with the unit in any way. Follow safety precautions specified by the power
supply manufacturer.