BAND-IT T30069 Center Punch Hand Tool - Manual (Page 5)

BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-0307 USA
P: 1-800-525-0758
F: 1-800-624-3925 Document # P15087 rev. H
© Copyright
BAND-IT-IDEX, Inc. 2011
All rights reserved
www.BAND-IT-IDEX.com
Page 5 of 5
T30069
CP Hand Tool
Warranty:
For Warranty information, visit the following URL
www.BAND-IT-IDEX.com/Warranty.html
3/8" Adapter &
Warranty
1. To convert T30069 center punch tool, rotate head back to expose buckle pusher and nose of tool.
2. Press down on the lobe at the rear of the buckle pusher to raise the front portion for insertion of
adapter between the buckle pusher and the nose.
3. Seat the adapter against the buckle pusher with the post of the adapter hooked at the rear of the
triangle shapes of the buckle pusher. Release the pressure on the buckle pusher lobe to secure the
adapter into place. Rotate the head forward. The tool is now ready to use.
4. Repeat instructions 1 and 2 to remove adapter.
PRESS DOWN & BACK
ADAPTER