Auto Meter 4359 - Manual (Page 5)

5
Locate the shift bracket. Using the previous BASICS SECTION for ideas, determine how you may need to modify this bracket to make it work for
your application. In several cases this bracket can be secured to your existing shift lever via the existing shift lever.
Mounting the Sender to the Transmission
Mount the sender to the sender bracket by using the two #8 screws, #8 washers and #8 lock washers. The screws will engage into brass inserts
that are part of the sender housing.
Find location for the sender on the transmission. Either in front of the shifter lever (1) or behind the shifter lever (2)
DESCRIPTION PICTURE
Mount the sender via the bracket to the underside of the
transmission/oil pan flange with a 5/16 bolt. The exact spot
depends on your application. Make sure that the "foot" of the
bracket is aligned with the transmission. The spacer is used
in applications where the transmission pan has a lip that
needs to be cleared.