Auto Meter 4359 - Manual (Page 4)

4
1. Floor shifter-cable,
aftermarket, shift lever
pointing down.
2. Column shifter,
U-bracket attached to
the transmission, install shift bracket
pointing down
3. Floor shifter, factory
setup, shift lever
pointing down.
4. Floor shifter, after
market, shift lever
pointing upward.
By making simple modifications to the shift bracket and the linkage, the sender can be adapted to fit to many transmission configurations. The
linkage comes with a preset offset. Adjustments can be made by simply in creasing or decreasing the pre-existing bends.
Shift Bracket linkage
Basics
The sending unit is mounted to the transmission/oil pan flange via a rugged bracket and connects to the shift select lever on
the transmission through a linkage.
While there are many installation scenarios possible, the following four pictures give you an overview of the more common
ones. (some of the fasteners that are already on the vehicle are not shown).