AirLive WN-220ARM User Manual

Page 71

4. Appendix

AirLive WN-220ARM User’s Manual

IV. Turn off the WiFi Broadband Router and the client, then restart it and

then turn on the client again.

V. Ensure that the LEDs are indicating normally. If not, make sure that

the power and Ethernet cables are firmly connected.

VI. Ensure that the IP Address, subnet mask, gateway and DNS settings

are correctly entered for the network.

VII. If you are using other wireless device, home security systems or

ceiling fans, lights in your home, your wireless connection may

degrade dramatically. Keep your product away from electrical devices

that generate RF noise such as microwaves, monitors, electric

motors…

B. What can I do if my wireless client can not access the Internet?

Out of range: Put the router closer to your client.

II. Wrong SSID or Encryption Key: Check the SSID or Encryption

setting.

III. Connect with wrong AP: Ensure that the client is connected with the

correct Access Point.

i. Right-click on the Local Area Connection icon in the taskbar.

ii. Select

View Available Wireless Networks in Wireless

Configure. Ensure you have selected the correct available

network.

iii. Reset the WiFi Broadband Router to default setting

C. Why does my wireless connection keep dropping?

I. Antenna

Orientation.

i. Try different antenna orientations for the WiFi Broadband Router.

ii. Try to keep the antenna at least 6 inches away from the wall or other

objects.

II. Try changing the channel on the WiFi Broadband Router, and your

Access Point and Wireless adapter to a different channel to avoid

interference.