AirLive WN-220ARM - Manual (Page 51)

3. Configuration
AirLive WN-220ARM User’s Manual 47
3.5.1 System Log
This page supports two methods to export system logs to specific destination by means of
syslog (UDP) and SMTP(TCP). The items you have to setup include:
1. IP Address for Syslog: Host IP of destination where syslog will be sent to. Check
Enable to enable this function.
2. Setting of Email alert: Check if you want to enable Email alert (send syslog via email).
3. SMTP Server: Port: Input the SMTP server IP and port, which are connected with ':'. If
you do not specify port number, the default value is 25.
For example, "mail.your_url.com" or "192.168.1.100:26".
4. SMTP Username: Enter the Username offered by your ISP.
5. SMTP Password: Enter the User name offered by your ISP.
6. E-mail Addresses: The recipients are the ones who will receive these logs. You can
assign more than 1 recipient, using ';' or ',' to separate these email addresses.
7. E-mail Subject: The subject of email alert is optional.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes.