AirLive WN-220ARM - Manual (Page 55)

3. Configuration
AirLive WN-220ARM User’s Manual 51
5. SNMP Version: Select proper SNMP Version that your SNMP Management software
supports.
6. WAN Access IP Address: If you want to limit the remote SNMP access to specific
computer, please enter the PC’s IP address. The default value is 0.0.0.0, and it means
that any Internet connected computer can get some information of the device with
SNMP protocol.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes.
3.5.5 Routing
If you have more than one routers and subnets, you will need to enable routing table to allow
packets to find proper routing path and allow different subnets to communicate with each other.
The routing table allows you to determine which physical interface addresses are utilized for
outgoing IP data grams.