AirLive WN-220ARM - Manual (Page 68)

3. Configuration
AirLive WN-220ARM User’s Manual 64
3.6.6 Miscellaneous – Wake on LAN & Ping
1. MAC Address for Wake-on-LAN: It enables you to power up a networked device
remotely. If you would like to trigger this function, you have to know the MAC address
of this device. For instance if the MAC address is 00-11-22-33-44-55, enter it into the
blank of MAC Address for Wake-on-LAN. Afterwards. Afterwards, click "Wake up"
button which makes the router to send the wake-up frame to the target device
immediately.
2. Domain Name or IP address for Ping Test: Allow you to configure an IP, and ping
the device. You can ping a specific IP to test whether it is alive.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes.