AirLive WN-220ARM - Manual (Page 27)

3. Configuration
AirLive WN-220ARM User’s Manual 23
3. Activate WWAN for Auto-failover : Once you enable this function, you have to input
WWAN information for 3G Auto-Backups (see as WWAN 3G portion). Host Name : ISP
host name
4. PPPoA Account: input your account
5. PPPoA Password: input your password
6. Primary DNS and Secondary DNS
7. ISP registered MAC Address
8. Connection Control: you can choose Connect-on-demand, Auto Reconnect (always-on)
and Manually.
9. Maximum idle time : 600 seconds
10. NAT disable: If you enable this option, the device would not transfer the LAN IP to WAN IP,
it will behave like a pure router.
11. Data Encapsulation: Vc-MUX and LLC, these two options depend on your ISP setting.
12. VPI and VCI, Schedule Type: these values depend on your ISP setting.
B. Dynamic IP Address