AirLive WN-220ARM - Manual (Page 49)

3. Configuration
AirLive WN-220ARM User’s Manual 45
2. Connection control: Check "Connection control" to enable the controlling of which
wired and wireless clients can connect with this device. If a client is denied to connect
with this device, it means the client can't access to the Internet either. Choose "allow"
or "deny" to allow or deny the clients, whose MAC addresses are not in the "Control
table" (please see below), to connect with this device.
3. Association control: Check "Association control" to enable the controlling of which
wireless client can associate to the wireless LAN. If a client is denied to associate to the
wireless LAN, it means the client can't send or receive any data via this device. Choose
"allow" or "deny" to allow or deny the clients, whose MAC addresses are not in the
"Control table", to associate to the wireless LAN.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes.
3.4.5 Miscellaneous
1. Administrator Time-out: The time of no activity to logout automatically, you may set it
to zero to disable this feature.
2. Remote Administrator Host/Port
In general, only Internet user can browse the built-in web pages to perform
administration task. This feature enables you to perform administration task from
remote host. If this feature is enabled, only the specified IP address can perform remote
administration. If the specified IP address is 0.0.0.0, any host can connect with this
product to perform administration task. You can use subnet mask bits "/nn" notation to
specified a group of trusted IP addresses for example, "10.1.2.0/24".