AirLive WN-220ARM - Manual (Page 32)

3. Configuration
AirLive WN-220ARM User’s Manual 28
(3) Manually: The device will not make the link until someone clicks
the connect-button in the Status-page.
4. Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to
zero or enable “Auto-reconnect” to disable this feature. If Auto-reconnect is enabled,
this device will connect with ISP automatically after system is restarted or connection
is dropped.
5. Service Name: Sometimes your ISP would give you a specified service name to
dial-up.
6. Assigned IP Address: If your ISP give you a specified IP address, fill it here.
7. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The
default MTU value is 0 (auto).
8. NAT disable: If you enable this option, the device would not transfer the LAN IP to
WAN IP, it will behave like a pure router.
9. Data Encapsulation: Vc-MUX and LLC, these two options depend on your ISP
setting.
10. VPI and VCI, Schedule Type: these values depend on your ISP setting.