AirLive WN-220ARM - Manual (Page 31)

3. Configuration
AirLive WN-220ARM User’s Manual 27
D. PPPoA
1. LAN IP Address: The local IP address of this device. The computer on your network
must use the LAN IP address of this device as their Default Gateway. You can change
it if necessary.
2. PPPoA Account ,Password, Primary and Secondary DNS:
Enter the proper settings provided by your ISP.
3. Connection Control: There are 3 modes to select:
(1) Connect-on-demand: The device will link up with ISP when the clients send
outgoing packets.
(2) Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.