AirLive WHA-5500CPE-NT - Manual (Page 99)

6. Command Line Interface
93 AirLive WHA-5500CPE-NT User’s Manual
Command> set age out time 5
Radio1 age out time: 5
„ set transmit power
‰ Purpose: To set the TX output power value of the radio
‰ Example:
Command> set transmit power 20
Radio1 transmit power: 20
„ set data rate
‰ Purpose: To set the date rate. For example, 54mbps, 36mbps….etc
‰ Example:
Command> set data rate 54
Radio1 data rate: 54
„ set acktimeout <11A>
‰ Purpose: To set the ACK timeout value
‰ Example:
Command> set acktimeout 25
AckTimeOut for radio1: 11A=25
„ set vlan for ssid
‰ Purpose: Enable VLAN function
‰ Example:
Command> set vlan for ssid enable
„ set diffserv marking
‰ Purpose: To enable diffserv marking function in multiple SSID & VLAN
configuration.
‰ Example:
Command> set diffserv marking enable
„ set security none
‰ Purpose: To remove security policy from a SSID
‰ Example:
Command> set security airlive none
Set Radio1 no security !