AirLive WHA-5500CPE-NT - Manual (Page 14)

1. Introduction
AirLive WHA-5500CPE-NT User’s Manual
8
1.5.7 WISP Router Mode
In WISP Router Mode, WHA-5500CPE-NT connects to the remote Access Point as in
Client Infrastructure Mode. On the LAN side, it acts like a wired router for IP sharing
function. This mode is best used for IP sharing application for WISP subscribers. In this
mode, the WAN is the wireless client side, the LAN is the wired side. Please see Chapter 10
for step-by-step application example of this operation mode.
1.5.8 AP Router Mode
In AP Router Mode, the WHA-5500CPE-NT behaves like a wireless router. The LAN port
of the WHA-5500CPE-NT will become WAN port. The wireless network of
WHA-5500CPE-NT becomes the LAN side. Please note when this mode is used, the only
way to manage the WHA-5500CPE-NT is through the wireless side unless remote
management is opened.