AirLive WHA-5500CPE-NT - Manual (Page 87)

6. Command Line Interface
81 AirLive WHA-5500CPE-NT User’s Manual
„ ftptest 11a
‰ Purpose: Test if a SSID’s connection is okay
‰ Example:
Command> ftptest airlive 11a 40
Set SSID : airlive , mode = 11a , channel = 40 ok !
„ save config
‰ Purpose: save configuration file. Please remember to “save config” after
making changes
‰ Example:
Command> save config
None
„ clear config
‰ Purpose: Clear configuration to default
‰ Example:
Command> clear config
Are you sure ? ( y/n ) : y
Write flash block [/dev/mtd3]
Write file is [/etc/defsysconfig.conf]
Rebooting...
„ webservice
‰ Purpose: Enable or Disable Web management interface on LAN or WAN
‰ Example:
Command> webservice lan enable
webservice from lan enable
„ site survey
‰ Purpose: Site Survey display
‰ Example:
Command> site survey
Please wait a moment for site survey...
ESSID MAC Address Conn Mode Channel Turbo Super XR WME Signal Strength(dbm) Security Network
=====================================================================================
airlive 00:4f:79:90:00:27 A 36 - -- * -49 None AP
airlive 00:4f:69:52:a1:ca A 36 - -- * -61 None AP
WHA-5500CPE-NT-ap 00:4f:69:90:00:01 A 36 - -- * -56 None
AP