AirLive WHA-5500CPE-NT - Manual (Page 79)

5. Web Management2: System Configuration, Tools and Status
73 AirLive WHA-5500CPE-NT User’s Manual
5.1.6 Firmware Upgrade
System Configuration -> Firmware Upgrade
can upgrade the firmware of your WHA-5500CPE-NT (the software that controls your
WHA-5500CPE-NT’s operation). Normally, this is done when a new version of firmware
offers new features that you want, or solves problems that you have encountered with the
current version.
„ Upgrade Firmware:
To update the WHA-5500CPE-NT firmware, first download the firmware from AirLive
web site to your local disk, and then from the above screen enter the path and filename
of the firmware file (or click Browse to locate the firmware file). Next, Click the
Upgrade button to start.
The new firmware will be loaded to your WHA-5500CPE-NT. After a message appears
telling you that the operation is completed, you need to reset the system to have the
new firmware take effect.
Do not power off the device while upgrading the firmware.
It is recommended that you do not upgrade your WHA-5500CPE-NT
unless the new firmware has new features you need or if it has a fix to
a problem that you’ve encountered.
5.1.7 Configuration Save and Restore
System Configuration -> Configuration Save and Restore
You can save system configuration settings to a file, and later download it back to the
WHA-5500CPE-NT by following the steps.
Step 1 Select
Configuration Save and Restore from the System Configurations menu.