AirLive WHA-5500CPE-NT - Manual (Page 16)

2. Install the WHA-5500CPE-NT
AirLive WHA-5500CPE-NT User’s Manual 10
2
2.
Installing the
WHA-5500CPE-NT
This section describes the hardware features and the hardware installation procedure for
the WHA-5500CPE-NT. For software configuration, please go to chapter 3 for more
details.
2.1 Before You Start
It is important to read through this section before you install the WHA-5500CPE-NT
„ The WHA-5500CPE-NT comes with everything you need to start installation with
exception of the PoE Ethernet Cable. You can use a good quality CAT-5E
outdoor graded Ethernet cable (shielded with anti-UV) according to the length
you need.
„ The WHA-5500CPE-NT must be installed in the upright position if the unit is
located in outdoor or wet environments.
„ The use of 5GHz spectrum, Turbo modes, and 5/10MHz channel bandwidth
might be prohibited in some countries. Please consult with your country’s
telecom regulation first.
„ You must set the distance parameter to make long distance connection work.
Please refer to chapter 4 of this user’s guide for details.
„ If you choose to use the external antenna, please remember to connect the
external antenna first before power on WHA-5500CPE-NT.