AirLive WH-5420CPE - Manual (Page 9)

6
Traffic Control QoS Function
Traffic Control is a great tool to control
the bandwidth of the WISP subscribers.
Therefore, the WISP operators can
offer different class of connection
speeds for different subscription fees -
just like the ADSL service! The
AirLive advance Traffic Control
firmware can control the bandwidth by
Interface or IP/MAC.
Dynamic Signal Survey Function for Antenna Alignment
Having trouble align your antenna
correctly to the other outdoor AP?
The AirLive Wireless Signal Survey
function tells you the receiving signal
strength dynamically as your antenna turns. It
automatically refreshes itself in the process,
therefore, making antenna alignment much
simpler than before.
Wireless Site Survey Connection Wizard
During a new WISP service
installation, the installer will need
to find out which outdoor AP
provide the best signal in the area
for connection. The AirLive
wireless site survey function
provides one step setup for this
process. First, the site survey
page shows which AP has the
strongest the signal. Then the
installer performs antenna
alignment by using the signal survey function. At last, the installer simply clicks on
―connect‖ button to establish connection. The site survey is available even in AP mode, so
the installer can check the channels used by surrounding APs to avoid interferences.