AirLive WH-5420CPE - Manual (Page 45)

42
 DMZ: You can use DMZ Settings to provide connection on internet. For example, you
can have your own web server at home and provide access on internet. This will need
port 80 by default for Virtual Server Settings.
 Remote Management: This is to configure WH-5420CPE be managed from internet.
Note that port 80 is always used by web service. You can change the port to prevent
conflict.
 Site Survey: Site survey helps to find out available access point around. You can also
check to prevent using same SSID or channel with other AP.
To configure the security connection, please refer to Section 3.9 Wireless Security
Settings
……
To configure the Advanced Settings, please refer to Section 3.10 Advanced Wireless
Settings
……
To configure the access control, please refer to Section 3.11 Access Control
Settings ……
To configure the Traffic Control, please refer to Section 3.12 Access Control
Settings
……