AirLive WH-5420CPE - Manual (Page 38)

35
3. Click on
“Signal Survey” button.
4. A pop up page shows the signal strength.
5. The signal strength refresh every 3 seconds, you can then change your antenna for a
better signal.
To configure the security connection, please refer to Section 3.9 Wireless Security
Settings
……
To configure the Advanced Settings, please refer to Section 3.10 Advanced Wireless
Settings ……
To configure the access control, please refer to Section 3.11 Access Control
Settings
……
To configure the Traffic Control, please refer to Section 3.12 Access Control
Settings
……