AirLive WH-5420CPE - Manual (Page 7)

4
Chapter1. Introduction
1.1 Overview
The WH-5420CPE is a outdoor wireless CPE based on IEEE 802.11g 2.4-GHz radio
technologies. It contains an 802.11g wireless interface and one half/full-duplex 10/100 LAN
interface. Moreover, WH-5420CPE features a total of 8 wireless modes: Access Point,
Universal Repeater, WDS Repeater, WDS Bridge, Wireless Client, WISP (Client Router),
WISP + Universal Repeater and Gateway.
The web-based management utility is provided for easy configuration that your wireless
network connection is ensured to be always solid and hassle free.
Wireless Client Isolation
The WH-5420CPE features the new Wireless Client Isolation function previous available
only in more expensive APs. When you enable this function, the wireless clients will not be
able to see each other. Therefore, it is an important function for office and Hotspot operator
to protect the security between different wireless users.
ACK Timeout and TX Power Regulation
The WH-5420CPE features ACK timeout function to let you adjust the timeout value for
long distance operation. In addition, 6-level TX power adjustment let you match different
antennas for law compliance. The ability to set lower TX output power is also crucial if you
want to match the AP with external power amplifier.
Extended Security Features
AirLive WH-5420CPE provides 64/128bit WEP encryption, WPA and IEEE802.1x which
ensures a high level of security to protect users’ data and privacy. The MAC Address filter
prevents the unauthorized MAC Addresses from accessing your Wireless LAN. Your
network security is therefore double assured.
Whether it's for office or home environment, the AirLive 802.11g family brings you the
maximum performance and security for today's high speed wireless network.