AirLive WH-5420CPE - Manual (Page 76)

73
 Server: Select to enable DHCP server function.
DHCP Client Range: WL-5060AP IP addresses continuing from 192.168.100.1 to
192.168.100.253
Clone MAC Address: You can specify the MAC address of your Access Point to replace
the factory setting.
Disable Ping: WH-5420CPE did not response LAN ping if this function is checked.
Port Number: The default http port of the web management interface. You can change the
port number to prevent unexpected access.
Enable SSH: Except telnet, WH-5420CPE provides SSH for secure command line
management. You can enable the feature here. This device supports SSH2 for advanced
security.
Some of your devices could need to fix its IP address for convenience; you can record
these IP to prevent conflict. This can be done by Add DHCP Static Lease Client.
MAC Address: You have to fill the MAC address of the device which you want to record in
WH-5420CPE.
Lease IP Address: And assign IP address to the MAC address.