AirLive WH-5420CPE User Manual
Page 35
32
and choose the channel with best situation for communication. The number of
channels supported depends on the region of this Access Point. All stations
communicating with the Access Point must use the same channel.
802.1d Spanning Tree: Spanning tree is to prevent bridge loop when there are
multiple active paths between network nodes. Bridge loop could cause connection fail
or broadcast storm. Spanning tree allows a network design to include spare (redundant)
links to provide automatic backup paths if an active link fails, without the danger of
bridge loops, or the need for manual enabling/disabling of these backup links.
AP MAC Address: Fill the MAC address of the remote WDS node which you want to
connect to.
Site Survey: Use this button to find out the remote WDS node and check the signal
strength. It helps to build up you WDS network correctly.
To configure the security connection, please refer to Section 3.9 Wireless Security
Settings
……
To configure the Advanced Settings, please refer to Section 3.10 Advanced Wireless
Settings
……
To configure the access control, please refer to Section 3.11 Access Control
Settings
……
To configure the Traffic Control, please refer to Section 3.12 Access Control
Settings
……