AirLive WH-5420CPE - Manual (Page 75)

72
4. System Management
4.1 LAN Interface Setup
In this page, you can change the TCP/IP settings of this Access Point; select to
enable/disable the DHCP Client, 802.1d Spanning Tree, and Clone MAC Address.
IP Address: This field can be modified only when DHCP Client is disabled. If your system
manager assigned you static IP settings, then you will have to enter the information
provided.
Subnet Mask: Enter the information provided by your system manager.
Default Gateway: Enter the information provided by your system manager.
DHCP: Select Disable, Client or Server from the pull-down menu.
 Disable: Select to disable DHCP server function.
 Client: Select to automatically get the LAN port IP address from ISP (For
ADSL/Cable Modem).
Click her to
configure LAN
Interface Setup