AirLive WH-5420CPE - Manual (Page 65)

62
3.12 QoS Traffic Control
What is Traffic Control QoS?
Traffic Control is a great tool to control
the bandwidth of the WISP subscribers.
Therefore, the WISP operators can offer
different class of connection speeds for
different subscription fees - just like the
ADSL service! The AirLive advance
firmware can control the bandwidth by
Interface or IP/MAC.
What type of Traffic Bandwidth Control does the firmware offer?
The Traffic Bandwidth limits the ―Maximum Data Rate‖. There are 2 types of Traffic
Control it offers.
Interface Control
The interface QoS controls the
data rate at the WLAN and LAN
interfaces. Therefore, all traffics
are controlled the same way.
This type of traffic control is
suitable when AP is used as a
Client AP i
n ―Client Mode‖ and
WISP mode. So WISP can
control the maximum data rate
Individual IP/MAC Control
The AP can set the maximum data rate
for each IP or MAC addresses. This
type of traffic control is most suitable for
outdoor AP in ―AP‖ or ―Gateway‖ mode.
What is the Output Rate?
The ―Output Rate‖ is the data speed out of an interface. There are 3 types Output Rate
supported by the AP