AirLive WH-5420CPE - Manual (Page 34)

31
3.3 Bridge Mode Settings
 Alias Name: Another name for WH-5420CPE.
 Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface,
by so doing, you won’t be able to make wireless connection with this Access Point in
the network you are located. In other words, this device will not be visible by any
wireless station.
 Band: You can choose one mode of the following you need.
 2.4GHz (B): 802.11b supported rate only.
 2.4GHz (G): 802.11g supported rate only.
 2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate.
The default is 2.4GHz (B+G) mode.
 Channel Number: Allow user to set the channel manually or automatically. If set
channel manually, just select the channel you want to specify. If
“Auto”
is selected,
user can set the channel range to have Wireless Access Point automatically survey