AirLive WH-5420CPE User Manual

Page 63

select a level to make sure that the output power measured at the antenna end will not

exceed the legal limit in your country.

Enable WatchDog: Check and enable this watch dog function.

Watch Interval: Setup the interval time for watch dog function between 1 to 60 mins.

Watch Host: Enter the watch dog host ip address.

Ack timeout: When a packet is sent out from one wireless station to the other, it will waits

for an Acknowledgement frame from the remote station. If the ACK is NOT received within

that timeout period then the packet will be re-transmitted resulting in reduced throughput. If

the ACK setting is too high then throughput will be lost due to waiting for the ACK Window

to timeout on lost packets. By having the ability to adjust the ACK setting we can effectively

optimize the throughput over long distance links. This is especially true for 802.11a and

802.11g networks

You can set as default for auto adjustment.