AirLive WH-5420CPE - Manual (Page 19)

16
1.3.7 Configuration Setups
The factory default settings of WH-5420CPE are as following:
Settings Default Value
Device Name WH-5420CPE
Radio 802.11b/g
SSID airlive
Channel 11
WEP Disabled
IP Address 192.168.100.252
DHCP Server  In AP, Client, Bridge, WDS Repeater and Universal
Repeater mode, the default DHCP Server is disabled, please
set your PC's IP to the same subnet as the AP to access the
AP.
 In WISP, WISP + Universal Repeater and Gateway mode, the
default DHCP server is enabled. Please restart your PC to
renew the IP address.
DHCP IP Range 192.168.100.100 ~ 192.168.100.200
Table 3: Default Setting