AirLive NVR4 User Manual
Page 82
5. System Setup
AirLive NVR User’s Manual
77
The restart process should be displayed and you should be prompted back to the
“Maintenance” page after it is complete.
5.5.3.2 Reset the NVR to Factory Default
To reset the NVR back to its factory default, click “Default” button and begin the process:
The process should be displayed and you should be prompted back to the “Live View” page
after it is complete.
5.5.3.3 Firmware Upgrade
User might use this function to perform the firmware upgrading. Please press the “Browse”
button for select the firmware you download from the Internet. Then press “Upgrade” button
for starting the upgrading process.
Note: During the upgrading process, please do not unplug the power or the network cable
from the NVR, for that will damage the NVR and raise the reparation issue. Besides, after
upgrading the firmware, you will not be able to downgrade to the previous version. Please
contact your dealer or installer for the firmware upgrade operation.