AirLive NVR4 User Manual

Page 22

2. Package Contents and Installation

AirLive NVR User’s Manual

You should be prompted for the NVR’s username and password. Enter its default username

“admin” and password “airlive” and then click on”OK” to enter the system

2.3.2.2 Access NVR with its default IP address

The NVR comes with a pre-configured static IP “192.168.1.1. However, it is only used when

there is no DHCP server presented in the network. The NVR will turn on its DHCP server

function and act as the DHCP server in the network. To connect to the NVR, use a PC that

is on the same network over a switch or hub, or connect the PC directly to the NVR using a

crossover CAT5 Ethernet cable.

The PC that is connected directly to the NVR (or within the same local area network) should

receive an IP from it. Simply access the NVR from your web browser with its IP address