AirLive NVR4 - Manual (Page 23)

2. Package Contents and Installation
AirLive NVR User’s Manual 18
Again, you should be prompted for the username and password. Enter its default username
“admin” and password “airlive” and then click on ”OK” for accessing the system
Note: After you login into the NVR, your browser will prompt you to install the ActiveX
component. For letting the NVR work properly, please click on the prompted message and
allow the browser to install the ActiveX component.
2.4 Start to Use the NVR
After accessing the NVR via your browser, you should format your hard disk first. Then you
could open the “Channel Setting” page (Setup Channel Configuration Channel Setup)
for further configuring the connection between your NVR and IP camera.
Note: You should be prompted to install another ActiveX component after you open the
“Channel Setting” page. In order to make the search function work properly, please go
ahead and install the ActiveX component.
2.4.1 Format the hard disk
Once you install a hard disk to the NVR, you need to initialize it so that it can be ready for
recording. You can obtain the basic information about the disk you installed on the “Hard
Disk Setting” page (Setup System Configuration Disk Setup).
To initialize your hard disk, simply click the “Format” button. Please note, after performing
the format, all the data on the hard disk will disappear.