AirLive NVR4 - Manual (Page 78)

5. System Setup
AirLive NVR User’s Manual 73
c. You might set the duration separately via the “Start Time” and “End Time” drop-down
menu, or select the “All day” option to make the NVR recording for 24 hours.
d. Press the “Add” button, then the schedule should be shown on the “Schedule Table”.
e. After the schedule is set, please press the “Apply” button for save the configuration.
5.4.2.3 Copy the schedule to other channels
User can use the “Copy Schedule to Channel” function to copy current schedule setting to
other channel. Just select the desired channel from the drop-down menu and then press
the “Apply” button for saving the configuration. You can also copy the current schedule
setting to the other channels by pressing the “Copy Schedule To All Channels”.
5.4.2.4 Remove the schedule
a. Use the “Channel” drop-down menu and select a camera first.
b. Press the “Clear” button, the “Schedule Table” should be cleared.