3 connect to the nvr – AirLive NVR4 User Manual

Page 19

2. Package Contents and Installation

AirLive NVR User’s Manual

Put the back panel.

2.3.3 Connect to the NVR

There are various ways you can connect to NVR and below are the suggested methods for

different network setup:

The NVR is placed in a network with a DHCP server: Connect to the NVR by using

“NVR Search” Utility

The NVR is placed in a network without DHCP server (or you are connecting to it

directly): Access NVR with its default IP: 192.168.1.1

2.3.2.1 Use NVR Search Utility

If the NVR is placed in a corporate network or a local area network where a DHCP server is

already presented, install the “NVR Search” utility on the CD from a computer that is on the

same network and locate the NVR with its IP address that is assigned by the top-level

DHCP server.