AiM MyChron3 Basic - Manual (Page 53)

53
Quick reference guide
Configure MyChron 3
ƒ Press
VIEW to turn the system on.
ƒ Press
MENU/<< to activate the configuration mode.
ƒ Press
MENU/<< ( previous option ) or >> ( next option ) to scroll through
the configuration menu.
Setting the number of splits
ƒ Select the “Number of Splits” option.
ƒ Press
MEM to enter edit mode.
ƒ Press
MENU/<< or >> to set the number of splits.
ƒ Press
MEM to save or VIEW to quit.
Setting the obscuring time
ƒ Select the “Obscuring Time” option.
ƒ Press
MEM to enter edit mode.
ƒ Press
MENU/<< to set the correct number of seconds.
ƒ Press
>> to alternate between digits.
ƒ Press
MEM to save or VIEW to quit.
Setting the maximum RPM value
ƒ Select the “Maximum RPM Value” option.
ƒ Press
MEM to enter edit mode.
ƒ Press
MENU/<< or >> to set the required RPM.
ƒ Press
MEM to save or VIEW to quit.