AiM MyChron3 Basic - Manual (Page 48)

48
ƒ Logger information: this button allows the user to detect the
characteristics of the MyChron 3 connected to the PC;
ƒ Transmit: this button is used to send the configuration over to the
MyChron3 once you have finished;
ƒ Receive: if you connect to a PC a data logger of whom you do not know
the configuration, you may detect its configuration, by clicking the
Receive button, and to save it in the configuration’s database;
ƒ Online: the Online button allows the user to make a data acquisition
simulation, in order to verify if the new configuration is correct and if it
has correctly been transmitted to the data logger;
ƒ New / Delete / Clone: these three buttons allows the user to create a
new configuration, to delete an old one or to clone an existing one;
ƒ Exit: this button is used to exit the “Logger manager” menu.