AiM MyChron3 Basic - Manual (Page 44)

44
Configuration via software
As previously mentioned, MyChron 3 may be configured both via keyboard and
via software, by using Race Studio 2.
The “via software configuration” allows the user to configure their MyChron 3
and set some parameters that cannot be set using the keyboard.
It is reminded that, before starting the configuration via software, you
should install Race Studio 2 and the USB drivers as mentioned in the
previous chapter. It is also reminded, before configuring the instrument, to
connect it to a PC and to switch it on.
Once launched the program clicking on the Race Studio 2 icon, the following
screenshot will appear: