AiM MyChron3 Basic - Manual (Page 36)

36
MyChron 3 and the computer
MyChron 3 has a non volatile RAM memory which guarantees the capacity to
record up to 250 laps at a sampling frequency of 10 Hz ( ten times per second ).
MyChron 3 has been designed and developed to connect with a PC: through a
USB cable it is possible to connect MyChron 3 to a PC in order to both
download the data stored in memory and configure your instrument.
AiM reminds all MyChron 3 owners that, for a correct, complete and easier
instrument configuration, it is absolutely necessary to use a PC and our Race
Studio 2 software. This software has been properly developed by AiM in order to
interface all its products ( Drack, EVO 3, MyChron 2, MyChron 3, MXL, DaVid
and Dash ST1 ) with the PC.
New software installation does not either cancel or change the functionalities of
Race Studio. Once the program is installed, the user will be able to choose to
use the new software or the previous installation.
The following pages show how to install the software on your PC and how
to correctly configure your MyChron 3 by using a PC.