AiM MyChron3 Basic - Manual (Page 51)

51
20,000 / 22,000 / 25,000 RPM ) (see pages 27 and 28 for more
information);
ƒ Temperature: set both the Temperature measure unit ( °C or °F ) and an
Alarm value;
ƒ Lap: the user can set both the Obscuring time ( in a range between 3
and 59 seconds ) and the number of Split times (see page 24 for more
information).
Transmitting the configuration to MyChron 3
Once you set all the parameters, it is necessary to transmit the configuration to
the instrument. In order to transmit the configuration, you have to press Transmit
pushbutton and the system will automatically download the configuration from
the PC to the MyChron memory.
It is recommended, before transmitting the configuration, to switch on the
instrument and to connect it to the PC’s USB port.
If a previous configuration is stored in the instrument’s memory, when you press
the button Transmit the following dialog box will appear: