AiM MyChron3 Basic - Manual (Page 33)

33
Replaying
detailed data
for the lap
If you wish to replay detailed data for a lap, choose Manual or
Automatic replay.
Automatic lap replay: while in general display mode, press
MEM; then, using MENU/<< or >> choose the lap you wish to
see and then press MEM twice: the system will automatically
replay the graphic and decimal RPM, thermocouple
temperature and lap time from start to finish in time intervals
of one-tenth of a second ( 10 Hertz
→ 10 data points per
second ).
To stop the automatic lap replay press MEM. To return to
general display mode press VIEW again.
Manual lap replay: to manually step through the detailed lap
data, while the system is in general display mode, press MEM;
then, using MENU/<< or >> choose the desired lap and then
press MEM twice. The system will go to the “automatic lap
replay” mode.
Press >> or MENU/<< to stop the automatic replay; use
MENU/<< to decrease the progressive lap time by one-tenth
of a second and >> to increment the progressive lap time by
one-tenth of a second.
Press MEM, to return the system to “automatic lap replay”
mode. To return to general display mode press VIEW.