2N NetStar User Manual - Manual (Page 39)

39
6.1 Incoming Calls
An incoming call to your phone number in the system will make your 2N NetStar
®
Mobility Extension station ring like your internal station. An incoming call to your
mobile phone will be identified by the GSM gateway number or a public line number.
Upon an incoming call to the Mobility Extension station, an outgoing
call from to your mobile phone will be set up (and 2N
®
NetStar
charged accordingly).
ME Station Ringing On/Off
To enable the Mobility Extension station ringing during an incoming call, dial the ME
service access code from the mobile phone to which the calls are routed. After a
pre–recorded message is played, select the activation code mentioned below. The
deactivation procedure is the same.
Enable ringing
*55
Disable ringing
#55
Example: Suppose you want to turn on ringing on your GSM phone. Call the
communication system from your station. Your Mobility Extension will be recognised
automatically and a pre–recorded message "Mobility Extension, dial please" will be
played for system login confirmation. Now dial the service access code *55. You will be
informed of the ringing enable and the call will be terminated.
You can use the ringing enable/disable function for any user station
and thus cancel the station's ringing temporarily in the event of call
routing to the user.