2N NetStar User Manual - Manual (Page 15)

15
3.2 Call Parking
Call parking means setting aside a call for a rather long time for later unparking by any
user. With a call parked, you can use your station without limitations for both incoming
and outgoing calls.
Call Parking on Central Parking Place
Do you want to park your current call on any of the 10 parking places for later
unparking by you or any other user? Then dial the following:
F*42n
where F is FLASH and n is the number of the parking place where you want to park the
call.
If the communication system ignores your dialling, you are delivered an error message
informing you that either the parking place is full or you have entered a value outside
the 0-9 range. Try to park your call on another parking place or any time later.
If you succeed in parking the call, the call is terminated on your side and you can use
your phone without limitations. The caller is played music or a predefined voice
message.
If the caller hangs up, the call is released from the parking place and cannot be
recovered.
If you fail to unpark your call within a timeout (180s by default), your phone starts
ringing to remind you of your parked call.
Your communication system administrator may modify the parking
time.
Call Unparking
To unpark a call parked by you or other users, you have to know the number of its
parking place. To unpark a call dial:
#42n
where n is the number of the parking place from which you want to unpark the call.
Example: Suppose you want to unpark a call from parking place 5, where a colleague
of yours has parked it. Lift the handset and dial the service access code #42. You are
asked to enter the number of the required parking place. Enter 5. Now you are
automatically connected to the call waiting on parking place 5.