2N NetStar User Manual - Manual (Page 22)

22
*12nn#
Disable CFEC
#12
where nn is the number you want to forward the call to.
Example: Suppose you want to forward all of your incoming calls that cannot be
answered due to the user not being available to number 666. Lift the handset and
enter the service access code *12. You will be asked to enter the number for call
forwarding on busy. Enter 666 and press # for confirmation. You will be informed that
the call forwarding has been set.
CFEC means Call Forwarding on Error Cause. The call is forwarded not
only due to a busy status but also in the event of error causes.
User Forwarding on No Answer
By activating the service (Call Forwarding on No Answer, CFNA), you forward a call to a
destination of your choice (station, user, group, etc.) when you fail to answer the call
within a preset timeout (30s by default). Your phone will be ringing for the defined
time interval and then will be forwarded. The calling subscriber will hear the standard
ringing tone. The time period can be set by your administrator.
Enable CFNA
*13nn#
where nn is the number you want to forward the call to.
Disable CFNA
#13
Example: Suppose you want to forward all of your incoming calls that are not
answered within the defined CFNA timeout to number 777. Lift the handset and enter
the service access code *13. You will be asked to enter the number for CFNA. Enter
777 and press # for confirmation. You will be informed that the call forwarding has
been set.
Unconditional Station Forwarding
By activating this service you forward all of your station's incoming calls unconditionally
to a destination of your choice. An incoming call will alert your assistant's phone, if you
have chosen this option for example, instead of your phone. The calling subscriber will
hear the standard ringing tone.
Enable service
*21nn#
where nn is the number you want to forward the call to.
Disable service
#21