Infopanel, Keypad, Rfid card reader 125 khz – 2N Helios IP Verso User Manual
Page 88: Rfid card reader 13.56 mhz, Infopanel module, Keypad module, Rfid card reader module 125 khz
88
Infopanel Module
The Infopanel module (Part No. 9155030) is one of the
intercom
2N
®
Helios IP Verso
elements and is used for inserting and backlighting printed information.
The module contains two
bus connectors.
2N
®
Helios IP Verso
These two connectors are fully interchangeable and can be used both as inputs
from the basic unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
Keypad Module
The Keyboard module (Part No. 9155031) is one of the
intercom
2N
®
Helios IP Verso
elements and provides a numerical input in the system.
The module contains two
bus connectors.
2N
®
Helios IP Verso
These two connectors are fully interchangeable and can be used both as inputs
from the basic unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
RFID Card Reader Module 125 kHz
The 125 kHz RFID Card Reader (Part No. 9155032) is one of the
2N
®
Helios IP
intercom elements and is used for reading RFID card Ids in the 125 kHz band.
Verso
The module contains two
bus connectors.
2N
®
Helios IP Verso
These two connectors are fully interchangeable and can be used both as inputs
from the basic unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
EM4100, EM4102, HID Proximity
RFID Card Reader 13.56 MHz
The 13.56 MHz RFID Card Reader (Part No. 9155033) is one of the 2N
®
Helios IP
intercom elements and is used for reading RFID card Ids in the 13.56 MHz band.
Verso
The module contains two
bus connectors.
2N
®
Helios IP Verso
These two connectors are fully interchangeable and can be used both as inputs
from the basic unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.