Camera, Video stream, Interface – 2N Helios IP Verso User Manual

Page 105: Rfid card reader

105

Camera

Sensor: 1/3'' colour CMOS
JPEG resolution: Up to 1280 (H) × 960 (V)
Video resolution: 640 (H) × 480 (V)
Frame rate: Up to 30 snapshots/s
Sensitivity: 5.6 V/lux-sec (550 nm)
View angle: 128° (H), 95° (V), 155° (D)
Infrared light: Yes

Video stream

Protocols: RTP/RTSP/HTTP
Codecs: H.263, H.263+, H.264, MPEG-4, M-JPEG
IP camera function: Yes, ONVIF v2.2 profile S compatible

Interface

Power supply: 12 V ±15 % / 2 A DC or PoE
PoE: PoE 802.3af (Class 0 – 12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45
Recommended cabling: Cat-5e or higher
Supported protocols: SIP2.0, DHCP opt. 66, SMTP, 802.1x, RTSP, RTP, TFTP,
HTTP, HTTPS, Syslog
Passive switch: NO/NC contact, up to 30 V / 1 A AC/DC
Active switch output: 8 up to 12 V DC depending on power supply (PoE: 10 V;
adaptor: power supply voltage minus 2 V), max 400 mA

RFID card reader

Optionally 125 kHz or 13.56 MHz
Supported cards, 125 kHz: EM4100, EM4102, HID Prox
Supported cards, 13.56 MHz

ISO14443A

Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, SmartMX,
Ultralight,
Ultralight C, SLE44R35, my-d move (SLE66Rxx), PayPass, Legic
Advant

ISO14443B

Calypso, CEPAS, Moneo, SRI512, SRT512, SRI4K, SRIX4K, PicoPass,
HID iCLASS