General mounting principles, Surface mounting – 2N Helios IP Verso User Manual
Page 19
19
Surface mounting
concrete and steel structures, entry barrier columns,
.
interior, etc
What you need for mounting:
2N
®
Helios IP Verso plus the respective frames
1× module: frame Part No. 9155021
2× modules: frame Part No. 9155022
3× modules: frame Part No. 9155023
General Mounting Principles
Caution
The warranty does not apply to the product defects and failures arisen as
a result of improper mounting (in contradiction herewith). The
manufacturer is neither liable for damage caused by theft within an area
that is accessible after the attached electric lock is switched. The product
is not designed as a burglar protection device except when used in
combination with a standard lock, which has the security function.
When the proper mounting instructions are not met, water might get in
and destroy the electronics. It is because the communicator circuits are
under continuous voltage and water infiltration causes an electro-chemical
reaction. The manufacturer’s warranty shall be void for products damaged
in this way!
Tip
Select flush mounting where possible to make your product elegant
looking, more vandal resistant and more secure.
You are advised to buy the flush mounting boxes in advance and
commission your building company to do the masonry for you. This
approach helps you put your intercom exactly in the vertical position.