2N Helios IP Automation Manual v2.8 - Manual (Page 31)

31
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Example
The condition is met for an activated tamper switch (device not open):
Condition.InputState: Input1=tamper; Level=0
Condition.LogicalAnd
The block helps you create groups of conditions. The block is fulfilled if all LogicalAnd
the conditions in the defined group are met.
Parameters
Condition – define the list of conditions to be met. Separate the conditions with
a comma.
Example
The condition is met if conditions 1, 2 and 3 are met at the same time:
Condition.LogicalAnd: Condition=1, 2, 3
Condition.LogicalOr
The block helps you create groups of conditions. The block is fulfilled if one LogicalOr
condition at least of the defined group is met.
Parameters
Condition – define the list of conditions to be met. Separate the conditions with
a comma.
Example
The condition is met if conditions 1, 2 or 3 are met:
Condition.LogicalOr: Condition=1, 2, 3
Condition.LogicalNot
The block defines the condition to be met in case another defined condition LogicalNot
is not met.