Parameters, Variables, Example – 2N Helios IP Automation Manual v2.8 User Manual

Page 18

Text mode
Original mode

Parameters

Result – this parameter specifies the required test result.

Valid values:

any – the event is generated whenever the test is performed
(regardless of the result).
passed – the event is generated whenever the test is successful.
failed – the event is generated whenever the test fails.

The parameter is optional, the default value is

failed

Variables

This block does not define any specific variables.

Example

An event generated after the audio loop test if the test result is negative (i.e. the
microphone or loudspeaker is out of order):

Event.AudioLoopTest: Result=failed