2N Helios IP Automation Manual v2.8 - Manual (Page 28)

28
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Action.SendEmail
The block defines the action that sends an email. The email parameters are SendEmail
configured in the Services / E-Mail menu.
Parameters
Event – define the event to launch this action.
Condition – define the condition to be met for the action to be executed. This
parameter is optional.
User – define the user to whom the email will be sent.
Valid values:
user_position – numeric value of the user phone book position.
Email – define the email address to which the email will be sent.
Valid values:
user@domain_name, user@ip_address
Example
Send an email to the email address defined for the user in book phone position 5 if the
: event defined on row 2 arises
Action.SendEmail: User=5; Event=2
Tip
The parameter has a preference before the parameter . User Email